Indication:
Application:
During maintenance or long-term storage: Spray – One liter per cubic meter.
Heat exchangers and equipment during operation: Directly in the water. Dilute one part of fluid...
Indication:
Application:
Use directly in the refrigerant reservoir.
Dilute one part of fluid to 49 parts of water.
Indication:
Application: Pulverization, brush and broom.
Dilute 50% detergent/50% water. Brush and scrub, rinse and let dry naturally.
Indication:
Application: spray.
Aim the spray valve about 6” from the surface to be cleaned, spray, use soft brush to scrub, rinse and let dry. Repeat as needed. Avoid spraying directly to painted...
Indication:
Application:
Spray.
Aim the spray valve about 6” from the surface to be cleaned, spray. Wait 10 minutes to apply the second layer.
Indication:
Application:
Spray. Apply on the surfaces that will be assembled or disassembled.
Indication:
Application:
Spray.
Aim the spray valve about 6” from the chain, guide, sliding bearing or articulation and spray. For longer equipment life, apply AF® 80.80 every 2 weeks.
Indication:
Light and medium stamping, conformation and deep-drawn
Protection of parts for a prolonged period
Indication:
Degreaser with anticorrosive protection stricly for ferrous
Removal of waste from machining processes with water-soluble fluids.
Product not recommended for aluminum, yellow metals and...
Indication:
Removal of waste from machining processes with water-soluble fluids.
Degreaser with anticorrosion protection for ferrous metals, protecting parts and equipment
Product not recommended for...
Indication:
Removal of waste from machining processes with water-soluble fluids.
Degreaser with anticorrosion protection for ferrous, non ferrous and "yellow metals".
Better...
Indication:
Removal of waste from machining processes with "integral oil" and water-soluble fluids.
Degreaser with anticorrosion protection for ferrous, non ferrous and "aluminum"
Better...
Indication:
Grinding: 3% Lathe: 7% Milling / Drilling: 10%
Indication:
Grinding: 3% Lathe: 7% Milling / Drilling: 10%
Indication:
Grinding: 3% Lathe: 7% Milling/Drill: 10%
Indication:
Grinding: 3% Lathe: 7% Milling/Drill: 10%
Indication:
Immersion: minimum concentration of 10%.
Spraying: minimum concentration of 5%.
Indication:
Immersion: minimum concentration of 10%.
Spraying: minimum concentration of 5%.
Indication:
Immersion: Minimum 10%
Spray: Minimum: 5%
Indication:
Immersion: Minimum of 10% and Maximum of 30%. Spraying: Concentrate (Minimum of 10% and Maximum of 30%). Hydrostatic Testing: At least 2%, with 10% being ideal.
Application
Deposition: 1...
Indication:
Immersion: Minimum of 10% and Maximum of 30%. Spraying: Concentrate (Minimum of 10% and Maximum of 30%). Hydrostatic Testing: At least 2%, with 10% being ideal.
Indication:
Applications: Painting Brush, Spray, Cloths e Bath.
Indication:
Applications: Painting Brush, Spray, Cloths and Bath.
Indication:
Immersion: Minimum 10%
Spray: Minimum: 5%
Indication:
Immersion: Minimum 10%
Spray: Minimum: 5%
Indication:
Forms monomolecular layer that prevents waste desorption.
Fast drying. High power to degrease parts with complex geometry. Able to affix stabilizing anticorrosive crystals of surface:...
Indication:
Applications: placing in high points. The set of MV Dipenser® is sold only with refill. Refill sold separately.
Indication:
Applications: This product is recommended for oils in general, such as lubricating oil, transmission oil, hydraulic oil etc.
Indication:
Use at the concentration supplied.
Indication:
Applications: painting brush, paiting roll, immersion and spray.
Indication:
Applications: painting brush, immersion, spray, painting roll.
Indication:
Applications: painting brush, immersion, spray and painting roll.
Indication:
Applications: painting brush, immersion, spray and painting roll.
Indication:
Application: spray or sprinkle undiluted.
Indication:
Application: Painting Brush and Immersion.
Indication:
Able to affix stabilizing anticorrosive crystals of surface: V-active®.
Excellent corrosion inhibiting properties both in contact and vapor phases.
Soluble in oil and water base.
Indication:
Applications: This product is recommended for oils in general, such as lubricating oil, transmission oil, hydraulic oil etc.
Indication:
Antioxidant protection up to 48 hours after hydroblasting adding time to the painting process. Temporary antioxidant protection, no need to remove it for painting processes. Improves...
Indication:
Applications: Sold separately from the dispenser, however its intended use is with the set.
Indication:
Applications: Spraying, Paint brush and Bath.
Indication:
Applications: Spraying, Sponge and Cloth.
Indication:
Applications: spray, sprinkling, bath and painting brush.
Indication:
Applications: Spray, Sprinkling, Bath and Painting brush.
Indication:
Applications: Spray and Sprinkling.